| Customization: | Available |
|---|---|
| Resistance: | Fixed Resistor |
| Function for Resistance: | Protective Resistor, Load Resistor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| WATTS | L | D | H | d ± 0.05mm | PULLING (Kg) |
| 1/6W 1/8W 1/4WS | 3.3±0.3 | 1.8±0.3 | 28±2.0 | 0.35-0.4 | 2.5Kg - 30S |
| 1/4WS | |||||
| 1/4W | 6.0±0.5 | 2.3±0.3 | 27.0±2.0 | 0.35-0.4 | 2.5Kg - 30S |
| 1/2WS | |||||
| 1/2W | 9.0±0.5 | 3.5±0.3 | 26.0±2.0 | 0.42-0.5 | 2.5Kg - 30S |
| 1WS | |||||
| 1W | 11.0±1.0 | 3.8±0.5 | 24.0±2.0 | 0.45-0.5 | 3Kg - 30S |
| 2WS | |||||
| 2W | 15.0±1.0 | 5.0±0.5 | 33.0±2.0 | 0.5-0.6 | 5Kg - 30S |
| 3WS | |||||
| 3W | 17.0±1.0 | 6.0±0.5 | 32.0±2.0 | 0.6-0.7 | 5Kg - 30S |
| 5WS |
| ITEM (STANDARD) | PERFORMANCE AND/OR QUALIITY ACCEPTANCE |
TEST METHOD |
Resistance value Vs Temperature Characteristics |
For RX∠100KΩ +350~-500PPM/ºC 100KΩ<=RX <=1MΩ 0~-700PPM/ºC 1 MΩ ∠ RX 0~-1500PPM/ºC |
JIS-C-5202 5.2 Measure resistance (Ro ohm) at room Temperature(To ºC) Measure again the same at 100ºC Higher than room temperature R - RO 106 PPM = * RO (T0+100) -T0 |
Short time overload |
The resistance variation shall be within±(0.75% + 0.05 ohm) and there Shall be no mechanical breakage |
JIS-C-5202 5.5 Apply DC voltage 2.5times the rated Voltage for 5 seconds The leave at room temperature for 30 Minutes then measure MAX overload Voltage 0.50W - 700V (DC) |
Insulation resistance |
1000M ohm or more |
JIS-C-5202 5.6 In V-BLOCK Lay the resistor on 90° angle metal V Block apply 100VDC between resistor Lead and V block for one Minute And Measure |
Voltage endurance |
The resistance variation shall be within±(2% + 0.05ohm) and there shall be no mechanical breakage |
JIS-C-5202 5.7 Icy the resistor on the 90° angle metal V Block and apply reamed AC voltage for One Minute. Test voltage 0.25W - 500V (AC) 0.50W -700V(AC) |
Intermittent overload |
Resistance variation shall be Within ±(2.00% + 0.05ohm) |
JIS-C-5202 5.8 Apply AC voltage 4 times the rated voltage for 1 second and rest for 25 seconds and Repeat this cycle for 10000±200times leave resistor 30 minutes at room temperature after test and measure Maximum voltage for intermittent Overload.0.50W-700V(AC) |
| Terminal strength |
Resistance variation shall be within ±(0.5% + 0.05ohm) also there Shall be on mechanical breakage |
Pull test: apply 2.5kg force to the lead in the direction of lead axislor30±5 seconds. |
Heat resistively Against soldering |
Resistance variation shall be within ± (1.0%+0.05ohm) also there Shall be on mechanical breakage |
JIS-C-5202 7.10 Dip the lead in to a solder bath having a Temperature of 350ºC ± 10ºC up to 4±0.8mm from the body of the resistor at room temperature 3 hours after ,then Measure |
Solder ability |
More than 95% of the surface of the lead shall be covered by new solder after the leads are dipped in the Solder |
JIS-C-5202 6.5 Dip the lead in to a solder bath having a Temperature of 260ºC±5ºC up to 4±0.8mm from the body of the resistor and hold it for 5 ± 0.5seconds then inspect |
Humidity load test |
Resistance variation be Within ± (3.0% + 0.05ohm) Also there shall be mo mechanical breakage |
JIS-C-5202 7.9 In temperature chamber having temperature 40ºC±2ºC,relative humidity 90 - 95%, Apply rated voltage 1.5hour and shut voltage 0.5 hour repeat this cycle for 1000 hours, leave in room temperature for lhour after test, then measure |
Load life test |
The variation of the resistance Shall be within ± (3%+0.05ohm) Also there shall be no mechanical Breakage |
JIS-C-5202 7.10 In the constant temperature chamber having Temperature70ºC ± 2ºC,apply rated Dc voltage for 1.5hour and shut voltage for 0.5 hour and repeat thin cycle for 1000 hours, leave in room temperature lhour after test, then measure |
1. How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
2. What is your lead time?
It depends on the order quantity and the season you place the order.
Usually we can ship within 7-8 days for small quantity,and about 30 days for large quantity.
3.How can I get the price?
We usually quote within 1 working hours after we get your inquiry(Except weekend and holidays).
If you are very urgent to get the price, please email us or contact us in other ways (Like calling us) so that we can offer you a quote.
4. How to check the product quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
5. What terms and payment ways can we accept?
Accepted Delivery Terms: EXW,FCA, FOB.
Accepted Payment Type: T/T,PayPal,Western Union, and you can also consult with us.
){kind=link}